GenTent 10k Stormbracer with four frame adapters running portable generator cover

generator running cover, generator tent, generator canopy, wet weather generator, weatherproof generator, waterproof generator, generator electrocution hazards, tan generator tent, run generator in rain, run generator storms, square tubed generator cover


 
Alternative Views:


List Price: $224.79
Hurricane Prep Price: $159.99
You Save: $64.80


Availability: Usually Ships in 2 to 3 Business Days
Product Code: GT10KB4UTB

Canopy Edition

Standard (1yr/3yr Warr)
Extreme USA (3yr/3yr Warr) [Add $30.00]
Bundle Accessories & Save

Addt'l $5 off Clear Electrical Apron [Add $9.95]

Addt'l $7 off 10k Storage Bag [Add $17.95]

Addt'l $10 off Outside Stg GenSkirt [Add $24.95]
Choose Your Color
Click to view another Color

TanLight with Black trim
GreySkies with Black trim

Qty:
Description Specifications Installation Guide
 

Take your generator outside, run it in rain or wet weather and use GenTent to avoid CO poisoning, electrocution and generator damage. GenTent withstands forecast winds up to 70mph, snow load up to 18" and rain up to 12 inches per day. This is our universal fit model for open frame generators and includes four frame adapters that can be used on square and round tubular frames, for panels or muffler heat shield blocking direct clamp mounts, and for extending generator frame length and width on small generators. In either our TanLight or GreySkies color, GenTent provides a pleasing finished look to your portable generator. Choose between our Standard and Extreme editions. The Stormbracer Extreme extends the high quality Standard Edition by adding UV treatment, extreme cold weather rating and USA Manufacturing. Whichever edition fits best for you, simply Clamp it, Frame it and Cover it in three easy steps to Weatherproof your Power™!

Included in this package

  • Adapt It: Four universal frame adapters for square and round tubular frames and mounting hardware
  • Clamp It: Four complete clamps - clamp body, extending rod, stainless bolt/washer, rod setting clip, rubber sleeve adapter accomodate round tubular frames from 1" (25.4mm) to 1.5" (38.1mm) diameter
  • Frame It: High strength dual catalyst fiberglass frame rods and central connector
  • Cover It: Main generator tent canopy cover (Standard or Extreme) with short side and long side electrical covering aprons. Simply match correct apron length electrical panel side with 6" wrap arounds
  • Setup instructions and product safety manual
  • Links to detailed step by step setup videos
  • Free post installation follow up - simply send us pics!
  • Frame adapted with simple screw holes and included screws for this GenTent package

Features


  • Run your portable generator safely outside in wet weather - rain, snow, ice, sleet
  • Protects sensitive electrical panels and outlets and dome shape sheds water away
  • Allows easy refueling with large opening door flap
  • Universal cover size fits most portable generators*** over 3000W up to 10000W
  • Universal frame adaptation kit for square tubular, small frames, blocking panels and blocking muffler heat shields
  • Maintains generator natural cooling air flow and intake
  • Self-attaching to keep the "portability" in your portable generator
  • Directly connects to clear frame members or adapted frame members on your portable generator
  • RF Welded seams and vinyl fabric for water proofing
  • Adapters are screwed to frame (screws included)
  • Once adapted No Further Tools Required Simple 3 step setup

*** Use our "Find Your GenTent" tool above to ensure perfect fit for your generator. We review every order for fit accuracy. Bundles are available for mounting on square tubular frames, or where panels or heat shields a direct clamp connection. Special bundles and kits are available for Ridgid series portable generators and our XKi mounting makes the GenTent a fit for inverter and fully enclosed (closed frame) generators.


Accessories
GenTent 10k Omnifit Apron in Clear Vinyl GenTent XKi Accessory Pack for Inverters 1000W up to 3000W GenTent 10k Storage Bag GenTent XKu Accessory Pack for Inverters 3000W and over
Hurricane Prep Price: $14.95

Add
Hurricane Prep Price: $64.95

Add
Hurricane Prep Price: $24.95

Add
Hurricane Prep Price: $64.95

Add
GenTent accessory, electrical panel skirt, clear vinyl skirt, velcro electrical skirt, generator electrocution hazard, generator safety, weatherproof generator, waterproof generator GenTent XKi Accessory Pack for Inverters 1000W up to 3000W GenTent 10K Storage Bag GenTent XKu Accessory Pack for Inverters 3000W and over
GenSkirt 10k Extreme Converts GenTent 10k into a full storage cover Generator Folding Handles Kit
Hurricane Prep Price: $34.95

Add
Hurricane Prep Price: $29.95

Add
GenTent 10k full storage skirt generator fixed handles, generator folding handles, honda generator handles, foldable generator handles, GenTent compatible handles, black folding handle kit

Average Rating: 5 of 5 Total Reviews: 111 Write a review »

  0 of 0 people found the following review helpful:
 
Gent Tent cover September 11, 2019
Reviewer: Pat Crosskno from SUMMERFIELD, FL United States  
The cover and adapters were easy to put on and seems that it will do the job.  Fortunately, we did not need the generator during hurricane Dorian.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Better then advertised September 8, 2019
Reviewer: Jim from Wilmington NC  
Installed on my Dura Max XP12000E for Hurricane Dorian this past week. Only had to run for 12 hours but was very impressed with this cover, not only did it keep the generator dry but the wind never even effected it, did not hardly wiggle, this cover is A+++, so glad I bought it, will have no worry using this cover in any weather, have told everyone in the neighborhood about it, would buy again in a heart beat.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great quality generator protection July 17, 2019
Reviewer: Denny D. from Houston, TX United States  
I have installed a GenTent on my Firman 7500 but have not had the opportunity to utilize it in real time after a hurricane/storm outage (thankfully).   It seems to be a quality product.  It installed easily and looks like it should hold up over time.  I expect it to keep my generator dry under any aftermath rain conditions should they occur.   Will update this review should things change in the future.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Ok Quality July 15, 2019
Reviewer: Anonymous Person  
The Gentent was fine it fit good and will work. I think the prices are too high but no one really makes a comparable product.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Well made July 4, 2019
Reviewer: Jennifer Kleinberg from Shallotte, NC United States  
We purchased the storm skirt and storage skirt with our GenTent. Everything arrived together and much faster than estimated. Excellent kit and clear instructions. Only concern was the adapter kit suggested drilling holes into the generators metal frame. It has a powder coated finish that holes would remove and could cause a rust opportunity. Found a work-around for drilling. Product is excellent quality and a good fit.

Was this review helpful to you?

View All Customer Reviews