Portable Generator Folding Handles Kit

generator fixed handles, generator folding handles, honda generator handles, foldable generator handles, GenTent compatible handles, black folding handle kit


 
Alternative Views:


List Price: $34.95
Storm Prep Price: $29.95
You Save: $5.00


Availability: Usually Ships in 1 to 2 Business Days
Product Code: GTACCHDL00
Qty:

Description Specifications Installation Guide
 

Portable Generator Folding Handles Kit - Universal Fit

Introducing the GenTent® Portable Generator Folding Handles Kit. Replace your existing fixed handles that block the GenTent® canopy and electrical aprons from making a watertight fit; or simply upgrade your portable generator with a convenient accessory!

The GenTent® handles can accommodate round or square tubular frames from 1" to 1.5" easily! The hinge flange is set at 1.5" but squeezes down to the frame size when they are bolted on. This kit requires vertical frame posts to mount to, and if no bolt hole exists on the frame, a 5/16" through hole must be drilled. The GenTent® handles have been outfitted to smaller generators, all the way up to larger 22kw generators!

Smaller frame diameters CAN be accommodated by adding grommets/spacers between the frame and handle (not included).

Step by step instructions are included in this kit.

GenTent Universal Folding Handles

Features


  • Universal handle set can accommodate thousands of generators up to 22,000 watts
  • Handles can be outfitted to both round and square tubular frame
    • Handles require vertical frame posts to mount properly
  • Durable steel base handle with UL 94 V-0 flame retardant rate components.

Accessories
GenTent 10k Stormbracer Direct Connect for Portable Generators GenTent 10k Stormbracer Universal for Portable Generators
Storm Prep Price: $149.99

Add
Storm Prep Price: $159.99

Add
generator running cover, generator tent, generator canopy, wet weather generator, weatherproof generator, waterproof generator, generator electrocution hazards, tan generator tent, run generator in rain, run generator in storms, generator running cover, generator tent, generator canopy, wet weather generator, weatherproof generator, waterproof generator, generator electrocution hazards, tan generator tent, run generator in rain, run generator storms, square tubed generator cover

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 19 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Generator handles December 17, 2020
Reviewer: Tom W from FREMONT, OH United States  
Should have done this years ago.  Fighting to move a couple of hundred generator was no fun.. Handles make it as easy as wheelbarrow.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Generator Handles December 11, 2020
Reviewer: Gary Figgins from Mount Morris, MI United States  
Perfect fit for my Craftsman 6500 generator. Installed in about ten minutes. Good quality also.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 HANDLES December 1, 2020
Reviewer: Joe Callaco from Mays Landing, NJ United States  
GREAT FIT, LIKE THEM BETTER THAN ORIGINAL  HANDLES !!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Handles for generator November 10, 2020
Reviewer: Marion W. Hambrick from Spring, TX United States  
Good price, quick shipping, and well made


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Should have bought these years ago! October 14, 2020
Reviewer: GimmeShelter from Hillsborough, NJ United States  
These handles are great!  I always struggled moving my portable generator around.  It has two wheels but no handles so I had to "crab walk" it to move it around and it put a lot of strain on my lower back.  With these handles you can move your generator with ease.  They seem heavy duty and well made with large rubber grips for your hands.  They also fold down so your generator takes up no more space than it did before.  My generator has a 1" square tubing frame so I just added two washers on either side of the frame along with the provided plastic washers to take up the space (the handles also fit 1.5" frames).
So glad I found these handles.  Highly recommend.

Was this review helpful to you?

View All Customer Reviews