Special DuroMax Installation Steps for GenTent®
GenTent's notched sleeves now fit DuroMax square frame posts with no tools needed!
This advancement allows us to prioritize DuroMax owners' safety while maximizing the durability and reliability of their generator. Protect your DuroMax and WeatherProof your power with GenTent.
Updated GenTent Hardware Pack with Notched Rubber Sleeves
We’ve enhanced our standard hardware pack for most DuroMax open frame models!
Our new notched rubber sleeve is designed to fit both squared vertical frame posts and various blocked posts. Your hardware kit now includes a pre-assembled clamp and clip extension, along with all the components needed for the updated clamp assembly.
Step 1: Attach the Notched Rubber Sleeve to the Square Frame Posts
We’ve enhanced our standard hardware pack for most DuroMax open frame models!
Our new notched rubber sleeve is designed to fit both squared vertical frame posts and various blocked posts. Your hardware kit now includes a pre-assembled clamp and clip extension, along with all the components needed for the updated clamp assembly.
Step 2: Mount the Clamp on the Blocked Frame Post
We’ve enhanced our standard hardware pack for most DuroMax open frame models!
Our new notched rubber sleeve is designed to fit both squared vertical frame posts and various blocked posts. Your hardware kit now includes a pre-assembled clamp and clip extension, along with all the components needed for the updated clamp assembly.
Step 3: Measure and Set the Clamps to the Right Extension Setting
We’ve enhanced our standard hardware pack for most DuroMax open frame models!
Our new notched rubber sleeve is designed to fit both squared vertical frame posts and various blocked posts. Your hardware kit now includes a pre-assembled clamp and clip extension, along with all the components needed for the updated clamp assembly.
This setup will accommodate DuroMax models with blocked frame posts, leading to a slightly offset frame installation. Ensure that both clamps on the blocked frame leg corner and the opposite corner along the same width are set to the same height for a uniform installation that maintains strength and performs reliably in any weather.
The following DuroMax Models will be in Position 2 for the clamp settings:
- DuroMax XP10000DX
- DuroMax XP10000E
- DuroMax XP10000EH
- DuroMax XP10000HX
- DuroMax XP10000X
- DuroMax XP11000EH
- DuroMax XP11500EH
- DuroMax XP12000DX
- DuroMax XP12000E
- DuroMax XP12000EH
- DuroMax XP12000HX
- DuroMax XP12000X
- DuroMax XP13000DX
- DuroMax XP13000E
- DuroMax XP13000EH
- DuroMax XP13000HX
- DuroMax XP13000HXT
- DuroMax XP13000X
- DuroMax XP15000HXT+
- DuroStar DS10000
- DuroStar DS10000E
- DuroStar DS10000EH
- DuroStar DS11000DX
- DuroStar DS11000X
- DuroStar DS12000EH
- DuroStar DS13000DX
- DuroStar DS13000X
- DuroStar DS13000EH
The following models use Clamp Position 2.
Step 4: Install the GenTent Frame Rods
We’ve enhanced our standard hardware pack for most DuroMax open frame models!
Our new notched rubber sleeve is designed to fit both squared vertical frame posts and various blocked posts. Your hardware kit now includes a pre-assembled clamp and clip extension, along with all the components needed for the updated clamp assembly.
Step 5: Cover Your DuroMax Generator
We’ve enhanced our standard hardware pack for most DuroMax open frame models!
Our new notched rubber sleeve is designed to fit both squared vertical frame posts and various blocked posts. Your hardware kit now includes a pre-assembled clamp and clip extension, along with all the components needed for the updated clamp assembly.