 |
 |
 |
 |
GenTent XKu Accessory Pack- GTACCXKU00
This XKu accessory hardware pack converts any existing GenTent (first generation, second generation and Stormbracer® Edition) canopy and frame to directly attached to inverter generators starting at 3000W. This particular kit will fit inverter generators that are fully encased and meet minimum total area (2 x Length + 2 x Width) of 76" up to a maximum of 112". GenTent XKi includes a ratchet strapping system that uses genuine 1" Kevlar® webbing to securely hold extendable and adjustable corner section arms in place. The arms use high quality EPDM Grommets as feet which protect the inverter case from being marred, provide grip against the case and can be used in large/small combination to level the extension arms against curved inverter cases. The GenTent 10k XKi fits directly on a wide range of inverter generators from roughly 1,000 watts up to 10,000 watts.
This product is marine grade, Made in the USA and backed by a 3 year materials and workmanship warranty. Included in the package - 114" Kevlar based ratchet buckle, four (4) angle brace corner sections, eight (8) small footprint grommets, eight (8) large footprint grommets, eight (8) extender arms, setup instruction/product safety manual. No tools required!
Strap it, Frame it and Cover it in three easy steps to Weatherproof your Power
tm!
Notes:
- **Small and light inverter generators may be affected by wind more than heavy inverter generators. If your inverter is less than 75lbs, we recommend propping something stable such as bricks or rocks under each of the extender arms during use. This will help keep the assembly stable.
- Should your application require a strap longer than 112", please contact us directly as we can use two ratchet buckles.
- For International shipments, all duties and taxes are the responsibility of the purchaser.
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
Safely run your inverter generator outside in wet weather - rain, snow, ice, sleet Universal fit for most inverter generators from 1000 to 10,000 watts. Maintains inverter generator's natural cooling air flow
Simple installation - Clamp it, Frame it, Cover it
Keeps the "portability" in your inverter generator.
|
|
 |
 |
 |
 |

|