GenTent GTU-II Universal Frame Adapter

GenTent GTU-II Universal Frame Adapter


 
Alternative Views:


List Price: $4.95
Storm Prep Price: $4.95


Availability: Usually Ships in 2-3 Business Days
Product Code: GTACCB1U00
Qty:

Description Specifications Installation Guide
 

GenTent GTU Universal Frame Adapter - GTACCB1U00 - Spare or Accessory

Does your portable generator have one or more of the following?
  • Square tubular frame
  • Something already attached to a frame member (e.g., exhaust heat shield, battery cover, etc)
  • Small frame less than 25" long and 20" wide
If you do, the GTU-II Universal Frame Adapter is for you! The GTU-II is a simple to install accessory that attaches to the existing frame and provides a solid and convenient connection point for the GenTent clamp. Molded from polycarbonate, the GTU-II kit includes the frame adapter, two sheet metal screws and assembly instructions. *Please note, some assembly required; in order to attach, two 5/32" holes are required in the portable generator frame.

Features


Made of a very strong, outdoor rated polycarbonate blend Simple to install Adapts small frames and square tube frames to fit the GenTent Also compensates where a muffler heat shield or other panel blocks the GenTent clamp from a direct attachment

Average Rating: Average Rating: 4.5 of 5 4.5 of 5 Total Reviews: 32 Write a review »

  0 of 0 people found the following review helpful:
 
4 of 5 Great customer service September 30, 2020
Reviewer: Dave Buerger from Bartow, FL United States  
When my GenTent arrived, I discovered that an adapter was needed due to the model of my generator.  I phoned the company and the person to whom I spoke knew exactly what was needed, helped me with my request and sent out the part without delay.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 Helpful September 21, 2020
Reviewer: JOJO from Guilford, CT United States  
Sorry but the part was not necessary after all. Our Westinghouse generator was purchased in 2013, but  the adapter did not have to be attached. The clearance was there to attach the tent after all.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Spare part September 14, 2020
Reviewer: Douglas Blauschild from Fair Lawn, NJ United States  
Good follow up. Sent part

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 September 8, 2020
Reviewer: Ana Ruiz from Hialeah, FL United States  
It's been great dealing with GenTent.  Very please with the service and products.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 Not using at this time August 28, 2020
Reviewer: Chris Fay from New Milford, CT United States  
I found I was able to remove an end piece of framing around the muffler that would block the cover from attaching. My generator cover appears to be fine without the adapter, but I'll keep it in case I determine later that I need to keep that end framing piece on the generator.

Was this review helpful to you?

View All Customer Reviews