GenTent 20k Stormbracer portable generator running cover with four frame adapters

WeatherProof Your Power™ with the Independent Lab Tested and Patented GenTent® 20k Stormbracer® bundle with four frame adapters for running your over 10,000W portable generator safely in nearly any wet weather.

Take your generator outside, run it in rain or wet weather and use GenTent to avoid CO poisoning, electrocution and generator damage. GenTent withstands forecast winds up to 70mph, snow load up to 18" and rain up to 12 inches per day. This is our universal fit model for extra large (over 10,000W) open frame generators. Includes four frame adapters that can be used on square and round tubular frames, for panels or muffler heat shield blocking direct clamp mounts, and for extending generator frame length and width on large generators not quite large enough for the GenTent 20k. In either our TanLight or GreySkies color, GenTent provides a pleasing finished look to your portable generator. The Stormbracer Extreme Edition is UV treated, extreme cold weather rated and USA Manufactured. Simply Clamp it, Frame it and Cover it in three easy steps to Weatherproof your Power™!

Included in this package

• Adapt It: Four universal frame adapters for square and round tubular frames and mounting hardware
• Clamp It: Four complete clamps - clamp body, extending rod, stainless bolt/washer, rod setting clip, rubber sleeve adapter accomodate round tubular frames from 1" (25.4mm) to 1.5" (38.1mm) diameter
• Frame It: High strength dual catalyst fiberglass frame rods and central connector
• Cover It: Main generator Extreme Edition tent canopy cover with short side and long side heavy gauge, stackable, clear electrical covering aprons. Simply match correct apron length electrical panel side with 6" wrap arounds
• Setup instructions and product safety manual
• Links to detailed step by step setup videos
• Free post installation follow up - simply send us pics!
• Frame adapted with simple screw holes and included screws for this GenTent package