GenTent 20k Stormbracer Extreme running cover for Generac GP12500 - GP17500 portable generators

generator running cover, generator tent, generator canopy, generac rain cover, wet weather generator, weatherproof generator, waterproof generator, generator electrocution hazards, grey generator tent, run generator in rain, run generator in storms,


 
Alternative Views:


List Price: $293.89
Hurricane Prep Price: $209.89
You Save: $84.00


Availability: Usually Ships in 2-3 Business Days
Product Code: GT20KBGCTB

Bundle Accessories & Save

Addt'l $5 off 20k Storage Bag [Add $24.95]

Addt'l $10 off GenSkirt 20k [Add $34.95]

Addt'l $8 off Univ Folding Handles [Add $21.95]
Choose Your Color
Click to view another Color

TanLight with Black trim
GreySkies with Black trim

Qty:
Description Specifications Installation Guide
 

WeatherProof Your Power™ with the Independent Lab Tested and Patented GenTent® 20k Stormbracer® Generac GP12500 through GP17500 bundle for running your portable generator safely in nearly any wet weather.

Take your generator outside, run it in rain or wet weather and use GenTent to avoid CO poisoning, electrocution and generator damage. GenTent withstands forecast winds up to 70mph, snow load up to 18" and rain up to 12 inches per day. This is Generac GP12500 through GP17500 (Guardian and UltraSource included) bundle. Includes two frame adapters that attach to the electrical panel. In either our TanLight or GreySkies color, GenTent provides a pleasing finished look to your portable generator. The Stormbracer Extreme Edition is UV treated, extreme cold weather rated and USA Manufactured. Simply Clamp it, Frame it and Cover it in three easy steps to Weatherproof your Power™!

Note: Pictures shown include the optional universal fit folding handles, or use your current handles by replacing handle bolts with quick detach 5/16 x 2" clevis pins.

Included in this package

  • Adapt It: Four universal frame adapters for square and round tubular frames and mounting hardware
  • Clamp It: Four complete clamps - clamp body, extending rod, stainless bolt/washer, rod setting clip, rubber sleeve adapter accomodate round tubular frames from 1" (25.4mm) to 1.5" (38.1mm) diameter
  • Frame It: High strength dual catalyst fiberglass frame rods and central connector
  • Cover It: Main generator Extreme Edition tent canopy cover with short side and long side heavy gauge, stackable, clear electrical covering aprons. Simply match correct apron length electrical panel side with 6" wrap arounds
  • Setup instructions and product safety manual
  • Installation addendum for Generac GP12500 through GP17500 generators
  • Links to detailed step by step setup videos
  • Free post installation follow up - simply send us pics!
  • Frame adapted with simple screw holes and included screws for this GenTent package

Features


  • Run your large Generac, Ultrasource or Guardian GP12500, GP15000 or GP17500 portable generator safely outside in wet weather - rain, snow, ice, sleet
  • Protects sensitive electrical panels and outlets and dome shape sheds water away
  • Allows easy refueling with large opening door flap
  • Universal cover size fits most portable generators*** over 10000W
  • Maintains generator natural cooling air flow and intake
  • Self-attaching to keep the "portability" in your portable generator
  • Directly connects to all four frame members on your portable generator
  • RF Welded seams and vinyl fabric for water proofing
  • Install in Simple 3 step setup
  • Adapters connect through panel top bolts and can optionally be screwed for more secure fit (screws included)
  • Once adapted No Further Tools Required Simple 3 step setup

*** Use our "Find Your GenTent" tool above to ensure perfect fit for your generator. We review every order for fit accuracy. Bundles are available for mounting on square tubular frames, or where panels or heat shields a direct clamp connection. Special bundles and kits are available for Ridgid series portable generators and our XKi mounting makes the GenTent a fit for inverter and fully enclosed (no open frame) generators.


Accessories
Generator Folding Handles Kit GenSkirt 20k - Convert GenTent 20k into full storage cover GenTent 10k Storage Bag
Hurricane Prep Price: $29.95

Add
Hurricane Prep Price: $44.95

Add
Hurricane Prep Price: $24.95

Add
generator fixed handles, generator folding handles, honda generator handles, foldable generator handles, GenTent compatible handles, black folding handle kit GenSkirt full storage skirt GenTent 10K Storage Bag

Average Rating: Average Rating: 4.5 of 5 4.5 of 5 Total Reviews: 19 Write a review »

  0 of 0 people found the following review helpful:
 
4 of 5 gen tent September 10, 2019
Reviewer: mike phillips from dunnellon, FL United States  
it went together with no problems, haven't had to use the generator yet, but time is getting close for a monthly run time

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Quality January 1, 2019
Reviewer: James Montiel from LEHIGHTON, PA United States  
Haven't had it out in the elements, but judging by the fit and quality, It should be great.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Well built item March 31, 2018
Reviewer: Michael Walker from Willington, CT United States  
This is the solution to keeping my generator dry when I’m running it outside. Easy to assemble, even with the slight modifications needed for my particular generator. Haven’t had the opportunity to try it in rain or snow but the coverage it affords looks like it will keep it bone dry.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Its worth it. December 18, 2017
Reviewer: Michael Sileo from Rice, Virginia  
My original package had no assembly manual so putting this thing together was a battle of extreme frustration.  CSR provided a PDF file in an email and after looking at the pictures, it took me a total of 20 minutes to take it apart and reassemble it correctly.  Aside from the fasteners there are no metal parts.  The tent frame rods appear to be fiberglass, smooth finish.  The clear plastic shielding for your battery and charging panel are quite thick.  In addition to the tent I also got the skirt as I am using this as a permanent enclosure for the 15 KW generator.  The material is heavy duty and the whole thing hold together with Velcro strips, so easily attached and removed.

Given the value of any generator the cost to protect it is insignificant.  Mr Carpenter assured me that they would check all packages to make sure the manual was, in fact, included and he is sending me a hard copy via US Mail.

Thanks Mark and Merry Christmas to you and your team.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Gentent October 31, 2017
Reviewer: Anonymous Person from JACKSONVILLE, FL United States  
Appears to be a well designed product.  Still awaiting delivery of back ordered generator so haven't been able to trial fit but am sure it will do everything it is designed to do.

Was this review helpful to you?

View All Customer Reviews