 |
 |
 |
 |
WeatherProof Your Power™ with the Independent Lab Tested and Patented GenTent® 10k Stormbracer® bundle with Ridgid frame adapters for running your Ridgid portable generator safely in nearly any wet weather.
Take your generator outside, run it in rain or wet weather and use GenTent to avoid CO poisoning, electrocution and generator damage. GenTent withstands forecast winds up to 70mph, snow load up to 18" and rain up to 12 inches per day. This is our model for Ridgid RD Series generators 6000W and larger. The kit includes two frame posts to install at the front of the generator. These posts are necessary to provide a mounting point for the GenTent clamps. In either our TanLight or GreySkies color, GenTent provides a pleasing finished look to your portable generator. Choose between our Standard and Extreme editions. The Stormbracer Extreme extends the high quality Standard Edition by adding UV treatment, extreme cold weather rating and USA Manufacturing. Whichever edition fits best for you, simply Clamp it, Frame it and Cover it in three easy steps to Weatherproof your Power™!
Please note the Ridgid handle must be in the down position when using the GenTent.
Included in this package
- Adapt It: Two slotted frame members and mounting hardware for Ridgid Generators 6000W and larger
- Clamp It: Four complete clamps - clamp body, extending rod, stainless bolt/washer, rod setting clip, rubber sleeve adapter accomodate round tubular frames from 1" (25.4mm) to 1.5" (38.1mm) diameter
- Frame It: High strength dual catalyst fiberglass frame rods and central connector
- Cover It: Main generator tent canopy cover (Standard or Extreme) with short side and long side electrical covering aprons. Simply match correct apron length electrical panel side with 6" wrap arounds
- Setup instructions and product safety manual
- Ridgid frame adaptation installational addendum
- Links to detailed step by step setup videos
- Free post installation follow up - simply send us pics!
- Frame adapted with simple screw holes and included screws for this GenTent package
Specifications
Hardware Components
- Clamps: glass filled nylon 6-14GF
- Rubber Sleeves: EPDM
- Bolts/washers: stainless steel
- Self locking knob: nylon
- Clamp clip: polystyrene
- Fiberglass rods: dual catalyst high strength formulation
- Ridgid frame adapters: Black anodized 1.25" diameter machined aluminum posts
- Made in USA
- 3 year limited warranty
Standard Edition Canopy
- NFPA 701 FR rated vinyl laminated polyester, rated -25C to 85C (-15F to 185F)
- Outdoor rated Elastic
- Outdoor rate hook and loop
- 1 year limited warranty
Extreme Edition Canopy
- NFPA 701 FR rated, UV treated, vinyl coated polyester, rated -45C to 85C (-45F to 185F)
- Outdoor Gore elastic
- Genuine Velcro® hook and loop
- Manufactured in USA
- 3 year limited warranty
Shipping and Product Codes
- For International shipments, all duties and taxes are the responsibility of the purchaser.
- Free Shipping Continental US using UPS Ground, faster shipping available
- TanLight GenTent Standard Edition Product code shows as GT10KBRDTB on packing slips and invoice
- GreySkies GenTent Standard Edition Product code shows as GT10KBRDGB on packing slips and invoice
- TanLight GenTent Extreme Edition Product code shows as GT10KCRDTB on packing slips and invoice
- GreySkies GenTent Extreme Edition Product code shows as GT10KCRDGB on packing slips and invoice
|
|
 |
 |
 |
 |


|