GenTent 10k Stormbracer Edition - GT10KBHETB
This listing is now exclusively for the Ridgid RD903600 generator. The frame extender kit that comes bundled with this GenTent is a perfect fit to act as vertical frame posts added to the front of the Ridgid RD903600. If you arrived at this site looking for the correct GenTent package for the Honda EU6500is or Honda EU7000is, please see the
GenTent 10k XKu. The GenTent provides a method to connect the GenTent directly to your Honda EU6500is/EU7000is that requires no tools to install and allows the handles to be used while the GenTent is attached. Since the XKi mounting system uses a Kevlar® strap approach, there is no need for the frame extenders as shown in this product and therefore the price of the GenTent 10k XKi is significantly less!
GenTent 10k for Ridgid RD903600 description
This GenTent package includes a patented GenTent
® 10k Stormbracer® Edition wet weather safety canopy and a Ridgid RD903600 frame extender kit. The frame extender kit provides a mounting point for the GenTent clamps at the rear of the generator, while the GenTent clamps for the front of the generator are installed on the folding handles.
Note: Pictures shown using clear vinyl omniskirt covering outlets; this is a separately orderable accessory. The GenTent kit comes with opaque electrical skirts to cover the outlets.
In either TanLight or GreySkies, the GenTent provides a pleasing finished look to your portable generator, while keeping it safe to use in wet weather of nearly any kind. Withstands winds up to 70mph and snow up to 18". The GenTent ships complete with two electrical outlet protection skirts, one for the long side and one for the short side of your generator, where-ever the electrical outlets exist. Simply use the correct skirt for your generator. GenTent includes a universal clamping system that allows the GenTent to fit nicely on a wide range of portable generators from roughly 3,500 watts up to 10,000 watts. Adapters are included that accommodate round tubular frames from 1" to 1.25" in diameter.
Included in the package - four complete clamps, fiberglass frame, GenTent canopy, setup instruction/product safety manual and one Ridgid RD903600 frame extender kit. No tools required for GenTent setup after the frame extender kit is installed. Clamp it, Frame it and Cover it in three easy steps to Weatherproof your Powertm!
Note: For International shipments, all duties and taxes are the responsibility of the purchaser.